I/HCC Pro Wind Charge Controller | 24V / 48V
Intelligent Wind Charging with Integrated Protection
The iSTA-BREEZE® I/HCC Pro Charge Controller is designed to safely and efficiently manage battery charging from compatible wind generators. Built for professional wind energy systems, this controller helps protect the battery, turbine and overall system through intelligent monitoring, controlled braking and integrated safety functions.
This device is not a hybrid charge controller, but it can be integrated into a properly configured hybrid energy system when used with a suitable battery setup and compatible system components. A separate solar charge controller and wind charge controller may be connected in parallel to the same battery bank when correctly designed and installed.
Designed for Safe and Efficient Battery Charging
The I/HCC Pro controller monitors system voltage and manages the wind generator to prevent excessive charging. When the battery is full or the system reaches the defined voltage limit, the turbine is gently braked using an external dump load system.
This controlled braking process helps avoid immediate turbine blocking, reduces stress on the generator and supports a longer service life for the stator and system components.
Lithium Charge Controller Specifications
Nominal Battery Voltage
Configured according to your lithium battery specifications
Max. Input Power from Wind Turbine
2.2 kW
LCD Display Values
Ampere, watt, battery voltage, brake status and temperature
Charging Voltage
Configured according to your lithium battery specifications
Max. Wind Charging Current
48V System40 A
24V System80 A
Generator On / Off Switch
After generator stop, press Mode 1 / Off to lock the generator safely. For active operation, press Mode 0 / On and then close the manual brake button.
Manual Brake Button
For manual brake, press Off mode. For operation, press On mode.
Reset Button
Deactivates when the generator is on automatic brake.
Minimum Battery Voltage
Configured according to your lithium battery specifications
Automatic Overheating Brake
50°C braking / 45°C brake-out
Automatic Stop Charging Brake
Configured according to your lithium battery specifications
Wind Turbine Recharge Voltage
Configured according to your lithium battery specifications
Cooling
External aluminium cooling fins
Cable Termination
Battery: 10 mm / Wind turbine and dump load: 6 mm / Ground: 4 mm
Protection Class
IP20, indoor area
Dump Load
2 kW braking resistor
Operational Temperature
-20°C to +45°C / 35%–85% RH
Temperature Compensation
-4 mV/°C/2V, -35°C to +80°C, accuracy ±1°C
Recommended Battery Type
Lithium batteries. Voltage parameters are configured according to the battery brand, model and datasheet.
For lithium battery systems, the battery brand, model and datasheet should be provided before configuration. Voltage-related parameters are adjusted according to the lithium battery specifications.
